ALLEN&HEATH GLD-80 pack 1

Feature GDL-80

• Compact digital mixer with scalable, remote I/O
• Systems from 4 to 44 mics
• 1Easy to use, quick to access, analogue style interface
• dSNAKE Cat5 digital snake—up to 120m cable length
• 8.4 inch colour touchscreen for graphical view and setup
• 20 faders, 4 layers, 80 channel strips in a freely customizable layout
• 48 input channels into 30 assignable buses (Aux, Group, Matrix, Main, FX Send) into 20 mix outputs
• 8 stereo RackFX engines* with dedicated ‘short’ returns with 4-band PEQ
• Full processing on all inputs including trim, polarity, HPF, insert, gate, 4-band PEQ, compressor and delay
• Full processing on all outputs including insert, PEQ, GEQ, compressor and delay
• LR, None (monitors), LR+M (sum), LR+M (bus), LCR main mix modes
• 16 DCAs / mute groups
• Built-in Talkback, RTA and Signal Generator
• I/O module options for FOH/Monitor split, multitrack recording, link to iLive and more
• MIDI In/Out and Ethernet Network port
• AviomTM Pro16 compatible Monitor port on main AudioRack
• High end 1dB step recallable mic/line preamps
• User definable channel names and colours
• Engineer’s mono Wedge and stereo IEM strips
• Input, output and insert soft patchbays
• Quick copy, paste and reset of mixes and parameters
• Libraries, Scenes and Show memories with USB transfer

Feature AR-84

Input sockets

• 8 balanced XLR inputs for microphone and line level sources.
• The preamps are built into the AR84 rack and their Gain, Pad and 48V phantom power is remote controlled from the GLD console via the EXPANDER link.
• The output of the analogue preamps are converted to digital format and transported via a Cat5 cable to be processed and mixed at the GLD-80 mixer.
• The sockets are not numbered.
• This is because the number depends on where the AR84 is plugged into the GLD system.
• Write-on blocks are provided for you to label the sockets.

Output sockets

• 4 balanced XLR outputs operating at nominal +4dBu line level.
• Any GLD signal can be patched to any socket using the console I/O screen.
• The default Template Shows provide a logical mapping of these sockets to get you started.
• The sockets are not numbered.
• This is because the number depends on where the AR84 is plugged into the GLD system.
• Write-on blocks are provided for you to label the sockets.

EXPANDER

• Port Cat5 cable link to connect the AR84 expander to the EXPANDER port on the AR2412 AudioRack or GLD-80 Mixer.

Kensington security

• slot To attach a ‘Kensington lock’ standard anti-theft cable and lock if required.

Fan

• A low noise fan inside the rack ensures air movement to keep the circuits and internal components within operating temperature range.

Mains cable

• Clip You can secure the cable in place using the plastic P-clip.
• Use a T20 Torx screwdriver to refit the screw.

Mains power input

• IEC connector, fuse and power ON/OFF push switch for the built-in universal voltage power supply unit.
• This accepts worldwide voltages from 100 to 240V AC 50/60Hz.
• Check that you have received the correct mains lead for your territory.