The Shure Model VP88 is a single-point, stereo condenser microphone for use in professional studio recording, field production, electronic news gathering (ENG), and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet withstand rigorous field production environments.
One cartridge (Mid) faces forward to capture on-axis sound using a cardioid pickup pattern. The other cartridge (Side) is bi-directional, capturing sound from either side. The VP88 contains an internal M-S matrix with three settings for different degrees of stereo image separation. The internal matrix can be bypassed if an external matrix is used or if stereo imaging is done in post-production.
Feature.
Time-coherent, Mid-Side (M-S) design for optimal stereo imaging
Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs available
Mono compatibility ideal for broadcast applications
Switch-selectable, low-frequency rolloff (12 dB/octave below 80 Hz) for reduced pickup of ambient noise and stand vibration
Operates on phantom power or a 6V camera battery
LED power indicator Internal shock mount for reduced stand vibration and handling noise
Built-in “pop” screen
Specs.
Transducer Electret Bias Condenser
Polar Pattern Cardioid
Frequency Response 40Hz-20kHz
Dynamic Range (Typical) 105dB
Signal-to-Noise Ratio 70dB
Maximum Input Sound Level 800 Ohm Load: 129dB
150 Ohm Load: 119dB
Power Requirements Phantom Power, (9-52v DC)
Output Impedance 150 Ohms (100 Ohms Actual)
Output Connectors XLR-5M
Included ‘Y’ Cable then Terminates to Two XLR-3M Connectors
Pad None
Low Frequency Roll-Off Yes, (12dB/Octave Below 80Hz)
Applications Field Recording, ENG, Stereo Studio Miking, Broadcast
Dimensions 11.44 x 1.56″ (290 x 39.7mm) LxDiameter
